Glass gluing and dispensing
Urethane and sealant application cells for automotive glass with heated supply, bead inspection and primer.
Where it is used
Windshield, backlight and side glass in automotive assembly and glass processing; also panel and enclosure sealing.
Robots we supply for it
- EFORT ER six-axis
- Heated adhesive supply systems; bead vision
Brands are supplied, not represented. Figures appear only where we hold the datasheet; see the products page for the model lists.
Typical configuration
- Six-axis robot with dispensing nozzle
- Heated drum pump, hose and metering to the adhesive
- Centring table and glass handling; primer station
- Bead inspection camera and reject logic
- Cycle interface to the assembly line
Pre-integration and factory acceptance test
The cell is assembled, wired and run in our workshop in Wuhu before it is crated. For this workstation type the FAT covers:
- Bead applied on customer glass; profile measured
- Supply system run at temperature; metering verified
- Throughput measured — a delivered cell required 7.5 JPH and measured 14–18
You witness it on a video call or in person; the report with measured figures, photos and video ships in the technical package. How pre-integration works →
Questions we are asked about this cell
Cold or heated adhesive?
Most automotive urethanes are applied heated; the survey asks for the adhesive specification so the pump, hose and nozzle are sized to it.
Specify this cell in one sitting
The survey for this workstation type has 10 sections and about 79 questions — most are tick boxes. Online it saves as you type and gives you a reference number; the Word file is the same survey for e-mail.
Sections: Customer Basic Information · Vehicle Model & Glass Type Information · Gluing Process & Adhesive Requirements · Glue Supply System Requirement · Robot Trajectory Programming & Vision Inspection Requirement · Line Layout, Cycle Time & End-of-Arm Equipment Requirement · Site Utility & Installation Conditions · Commercial & Service Requirements · Supplementary Materials & Attachments Required · Other Remarks
Fill in the survey online → Download the Word file (.docx)
Or skip the wait: order the engineered proposal (S1) from USD 900 — credited in full against the equipment, refunded if the cell cannot meet your cycle time.
Send drawings and photos to sales@livespower.com with the reference number. No price is quoted before the part, the specification and the cycle time are known.